2012 LED and driver technology in a rugged GRP body with polycarbonate diffuser at a comparable price to LED tubes.
LED: -30°C - +30°C
|Order Code||L||H||W||Kg||LED Options||Eye Options||Emergency Options||Discontinued|
(Add suffix to order code)
/FM11: Microwave with 10% on standby
/FSLV: Slave luminaire for use with /FM11 master luminaire and optional remote sensors. Dims to 10%.
/M3: Integral maintained three hour emergency
/S23: Wireless links to group luminaires for dimming operation
/S3: Integral self test emergency function
/SSCLIP/GRP: Stainless steel diffuser retention clips
Example order code:
GPB30/FM11/4K – A 33 watt GPB luminaire and microwave with 10% standby
Note: All dimensions are in millimetres.
Please contact us for further information regarding this product.
High purity stainless steel clips are available, they are also more resistant to chemical attack. Also available in a vandal resistant variant. Clips required per fitting are 6 clips per 2ft, 8 clips per 4ft, 10 clips per 5ft and 12 clips per 6ft.
High purity stainless steel vandal resistant clips are available, they are also more resistant to chemical attack. Also available in a vandal resistant variant. Clips required per fitting are 6 clips per 2ft, 8 clips per 4ft, 10 clips per 5ft and 12 clips per 6ft.
A GRP hanger is made up of a GRP/SPEEDY-CLIP and a GRP/CHAIN-HOOK which can be ordered separately. Hangers required for each fitting are 2 per 2ft/4ft/5ft and 3 per 6ft.
The kit consists of two galvanised BESA box dome tops, two 20mm ferrules and locking nuts together with two mounting hole plugs. There is provision within the back of the body for two 20mm holes to be drilled, the dome top is fixed to a BESA box and with the use of the ferrules and locking nuts the fitting is very securely attached.
A range of galvanised protective wire guards are suitable for all types and sizes of Wirefield corrosion resistant luminaires. These corrosion resistant guards give added protection from accidental damage or vandalism.
Two small plastic clips can be inserted into the gear tray retention support, with the gear tray in place. This prevents the end user from accessing components behind the tray that require no user maintenance. 2 locking clips are required for each fitting.