Operates at 100% when presence is detected, and afterwards for 10 seconds to 12 minutes, then at 10% or off. Bright out facility so that the luminaire can be set to stay at 10% (or off) when sufficient daylight is available. Total off facility (factory option) allows, the luminaire to be set to initially dim to 10% then completely switch off after a further delay of up to 40 minutes. Designed and manufactured to comply with EN 60598 and are CE certified.
High Frequency: -25°C - +30°C
Integral Emergency: 0°C - +25°C
10% standby: 0°C - +30°C
|Order Code||Wattage||L||LED Options||Eye Options||Emergency Options||Discontinued||Info|
|LP128/840||1 x 28W||1221|
|LP135/840||1 x 35W||1541|
|LP149/840||1 x 49W||1541|
|LP154/840||1 x 54W||1221|
|LP180/840||1 x 80W||1541|
|LP6221/840||2 x 21W||1784|
|LP228/840||2 x 28W||1221|
|LP8228/840||2 x 28W||2394|
|LP235/840||2 x 35W||1521|
|LP6239/840||2 x 39W||1784|
|LP249/840||2 x 49W||1521|
|LP254/840||2 x 54W||1221|
|LP8254/840||2 x 54W||2394|
|LP280/840||2 x 80W||1521|
|LP6421/840||4 x 21W||1784|
|LP8428/840||4 x 28W||2394|
|LP6439/840||4 x 39W||1784|
|LP8454/840||4 x 54W||2394|
(Add suffix to order code)
/FP01: PIR with 10% on standby
/FP07: PIR with extended delay up to 30 minutes
/FSLV: Slave luminaire for use with /FP01 or /FP07 master luminaire
/FTB: Fused terminal block
/M3: Integral maintained three hour emergency
/MEC: Metal end caps (always supplied with the LP280/840)
/S3: Integral self test emergency function
LPC: Prismatic controller for the Eye Pack batten
LPR: Mild steel trough reflector finished in white
LPSR: Polished aluminium high rack reflector
WG: Wireguard which clips onto the LPR
Example order code:
LP135/FP01/840 – A 1x35 watt T5 Eye Pack 5ft luminaire which dims between 10% and 100% depending on presence and daylight detected by integral PIR. Supplied complete with lamps.
Note: All dimensions are in millimetres.
Please contact us for further information regarding this product.
High peak intensity for use at very high levels and in warehouse aisles.
A range of prismatic controllers extruded from ultraviolet polystyrene material for use with the T5 Eye Pack range. This is fitted at the point of manufacture, so must be ordered at the same time as the fitting and cannot be ordered as a seperate accessory.
Wire guards clip onto metal reflector ensuring robust construction for lamp protection.
A trough reflector suitable for use with single and twin lamp T5 Eye Pack luminaires. Manufactured from mild steel in a resilient white finish. This product is not designed to withstand onerous impacts from footballs/basketballs.
A polished aluminium reflector developed for use with single and twin T5 Eye Pack luminaires to produce best performance in high racking situations.